① The SLX-YD03 electric kiln prohibits the use of a 10A to 16A conversion plug. ➋ The socket wiring must comply with international standards (neutral on the left and live on the right).
Parameters: Chubby series electric kiln.
Door opening method: Ultra-light flip-top opening.
Moisture removal of kiln body: Brick permeability.
Exhaust and fire viewing aperture: 18mm.
Installation of heating element: Brick groove arc-shaped flat placement. Heating rate: 7°C/M.
Signal exchange: Switching quantity.
Forward withstand voltage: >500KP.
Shaanrui edge resistance: 0.6 – 2MΩ.
Diameter of heating element: 14MM. Curved surface thermal conductivity: <0.2W/M3.
Temperature control method: Programmable automatic rate control. Insulation material: Knitted fiber blanket.
Surface material: 304 textured stainless steel + resin + mullite brick. Insulation thickness: 120MM on the side/130MM on the bottom/95MM on the top.
Product type: Closed hollow cylindrical electric kiln.
Floor-standing method: Four-wheel universal with brakes.
Kiln door lock: 304 stainless steel convenient buckle.
Upper limit temperature: 1300°C.
Prolonged temperature resistance: 1280°C.
Control unit: High-speed electronic silicon tube.
Temperature measuring element: 0.2MM platinum-rhodium wire.
Signal feedback: >0.5S/time.
Reverse withstand voltage: >2MP.
Warranty period: 4 years (non-consumable).
Shell material: 304 textured stainless steel.
Furnace chamber material: Thermally prepared mullite brick.